How does a poulan chainsaw work?

How do you use a Poulan chainsaw?

Poulan Pro – Chainsaw Operation – YouTube

Why is my Poulan chainsaw not starting?

If your Poulan chain saw won’t start, the first thing to check is the fuel. … Then turn the saw on, hold it firmly and pull the start rope in short, brisk pulls until it starts. If it doesn’t start within 15 pulls, the spark plug is likely wet-fouled. Remove it and check for moisture on the electrode.

How does a chainsaw ignition system work?

Electrical currents run through the ignition coil and transmit electricity to the spark plug. The electricity creates sparks within the spark plug, and the sparks ignite the fuel in the engine, enabling the chain saw to run. Testing the ignition coil at home is simple to do and requires minimal tools.

How does a chainsaw Flywheel work?

The flywheel that’s contained inside the Poulan chain saw has magnets embedded in it. … When things are working correctly, the interaction between the magnets and the ignition coil produces electricity that reaches the spark plug.

How long will a Poulan chainsaw last?

That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.

How long will a Poulan Pro chainsaw last?

Re: Poulan Pro Chainsaws

To make up for the low price they may have lower quality parts, especially internal engine parts. Most of those discount saws have about 40 hours expected useful life built in to them. Stihl’s, in comparison, are either 500 or 1000, depending on the model.

How do you fix a Poulan chainsaw that won’t stay running?

Poulan chainsaw won’t idle – YouTube

Why is my Poulan chainsaw flooding?

Does your chainsaw fail to start and you don’t know why? There could be various causes: incorrect fuel mixture, carburation not calibrated properly, or a wet spark plug. Neglecting to look after a chainsaw can lead to malfunctions such as flooding. …

How do you start a flooded Poulan chainsaw?

How to fix and start flooded chainsaw, 2 stroke engine floods, solve the …

How do you adjust the coil on a Poulan chainsaw?

Poulan Chainsaw Repair – How to Replace the Ignition Coil – YouTube

How do I know if my chainsaw has spark?

HOW-TO Check For Good Spark On A Chainsaw – YouTube

What makes spark in a chainsaw?

The most common cause of sparks from a chainsaw is metal-on-metal grinding. Whether it’s cutting through wood that has a nail in it or a grinding of gears in the chainsaw housing, a metal-against-metal grinding is the most likely cause.

What is inside a chainsaw ignition coil?

A primary coil of perhaps 200 turns of thick wire wrapped around one leg of the U. A secondary coil of perhaps 20,000 turns of very thin wire wrapped around the primary coil. A simple electronic control unit that commonly goes by the name “electronic ignition” A pair of strong permanent magnets embedded in the flywheel.

How does a flywheel ignition work?

When you start your lawn mower or small engine, you turn the flywheel and its magnets pass the coil (or armature). This creates a spark. … Once the engine is running, the flywheel keeps rotating, the magnets keep passing the coil and the spark plug keep firing based on a specific timing.

How do you check a coil on a chainsaw?

Pull the start rope on the chainsaw and watch the end of the plug as you do. If you observe a spark jumping between the tips of the spark plug gap, it means the chainsaw coil is good. If there is no spark, it means the chainsaw coil will need to be replaced.

Are Poulan chainsaws junk?

they are all good strong running saws. when they were still biard poulan, they knew how to build them. nowadays they are all cheap junk.

Are Poulan chainsaws reliable?

Poulan is one of the most respected chainsaw brands – it’s right up there with the likes of ECHO and Jonsered. Poulan saws cost about the same when comparing apples for apples as well (or ccs for ccs). This 50cc Poulan Pro chainsaw is not quite on the same level as Stihl or Husqvarna, but it is significantly cheaper!

Is Poulan reliable?

Today, we all know Poulan tools as being reliable, affordable and really great to use. This did not happen by accident. The Poulan Saw Company has a rich history, going back more than half a century.

What is best chainsaw for the money?

Best chainsaws 2022: From STIHL to Makita chainsaws

  • Stihl 271 Farm Boss Chainsaw. …
  • Makita XCU03PT1 Chainsaw. …
  • OREGON CS1500 Chainsaw. …
  • Greenworks 60-volt Lithium Ion Chainsaw. …
  • Kobalt KCS 120-07 40 Volt Cordless Chainsaw. …
  • Echo CS-310-14 Chainsaw. …
  • Husqvarna 460 Rancher Chainsaw. …
  • WORX WG320 Cordless JawSaw.

What is the fuel mixture for a Poulan chainsaw?

A: Mix 3.2 ounces of Poulan 2-cycle air cooled engine oil to one gallon of fresh unleaded gasoline to obtain the recommended 40:1 fuel to oil ratio. Over a period of time oil will separate from gasoline.

How many hours can a chainsaw run?

What is the runtime of a Chainsaw? Depending on the type and usage, you can expect a gas Chainsaw to run between 15 and 40 min before you have to fill it up again. Most battery-powered chainsaws have a run time of up to 2 hours, but there are high-capacity power packs that will last much longer.

Why does my chainsaw dies when I give it gas?

Because your chainsaw will idle, but dies when it is revved up to full power, it means that the filter is only partially clogged, it will allow enough fuel to the engine to run on idle, but not enough to sustain full throttle. … If the filter becomes clogged, not enough fuel will reach the engine for it to run properly.

How do you adjust the high and low on a Poulan chainsaw?

High and Low Speed Adjustments

Start the chain saw as you normally do and let it idle, making sure the chain does not touch anything. Insert a small flat-head screwdriver into the idle speed screw and turn it clockwise to increase the engine speed if it idles too slowly.

Why is my Poulan chainsaw bogging down?

If your chainsaw is bogging down when you give it throttle, this is often a sign of improper gas-to-oil ratio. If there is too much gasoline in relation to the amount of oil used, this is known as a “rich mixture” and can cause the chainsaw to run poorly.

Will a chainsaw Unflood itself?

There are two ways you can try to clear the unit of the excess fuel and get it chopping wood. … Let your chainsaw sit for 15-20 minutes to allow the fuel to evaporate from the engine and then repeat the starting instructions. This method will work best with a mildly flooded engine.

How do you start a stubborn chainsaw?

Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.

Do you start a chainsaw with the brake on?

When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.

What is the gap between the coil and the flywheel on a Poulan chainsaw?

Set the ignition air gap.

014 or . 35mm), it is usually acceptable to use one thick business card, or two thin business cards as substitutes. Insert the ignition gapping gauge between the ignition coil and the flywheel.

What is the gap between ignition coil and flywheel?

Homelite advises that the gap between the ignition coil and the flywheel must be set anywhere from . 0012 to . 0013 inch for successful engine startup. If you’ve not replaced the ignition coil recently and your machine won’t fire up, it may be possible that you simply need to check the gap and reset it if necessary.

How do you check coils on a Poulan chainsaw?

Chainsaw Ignition Coil Test Step by Step Easy Test Covers All Chainsaws

When should a spark plug be replaced on a chainsaw?

A poorly functioning engine in a Stihl chainsaw can mean more work for the operator and can even be dangerous. Consequently, Stihl recommends replacing the spark plug after every 100 service hours.

How do I know if my chainsaw spark plug is bad?

What Does a Bad Spark Plug Look Like and What Makes It Look That Way?

  1. Black, chunky carbon buildup spanning the gap between the sparking end of the plug and the hook-shaped metal piece overhanging the end.
  2. Dark carbon residue built up on the ends but not spanning the gap.

Why will my chainsaw not start?

The chainsaw’s engine is flooded with fuel.

A fuel issue is one of the most common reasons why a chainsaw won’t start. … If you believe fuel has flooded the chainsaw engine, pull the starter cord several times while holding the throttle, dry and replace the spark plug, and then try starting the chainsaw again.

How tight should a chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.

Do all chainsaws use the same spark plug?

Spark plugs are a key part of maintaining a petrol power tool, especially STIHL chainsaws, and you may think that one spark plug is much the same as another. A standard NGK spark plug and NGK spark plugs sold by STIHL may have the same part number stamped on them, but the STIHL NGK spark plug has some key differences.

How does a two stroke ignition coil work?

During upward stroke of a 2 stroke spark ignition cycle, the piston moves upward i.e. from the bottom dead center to the top dead center. While moving up, it compresses the air-fuel mixture in the combustion chamber. … The spark plug ignites the compressed charge in the combustion chamber and produces the power stroke.

How do spark plugs and ignition coils work?

How an Ignition Coil Works – YouTube

How do you fix a spark plug coil?

How to Change Ignition Coils

  1. Safety First. Ensure the engine is cool, apply the emergency brake, and open the hood. …
  2. Remove the Ignition Coils. Ignition coil replacement can be challenging on some vehicle’s engines. …
  3. Test Each Ignition Coil with a Multimeter. …
  4. Lubricate the Coils Install Them. …
  5. Check Your Work.

How does a pull start engine get spark?

Whether you start the engine with a pull rope or the turn of a key on an electric start motor, you’re relying on the ignition system to produce a spark inside the combustion chamber. When you start your lawn mower or small engine, you turn the flywheel and its magnets pass the coil (or armature). This creates a spark.

How do spark plugs work without a battery?

Most small lawn mowers, chain saws, trimmers and other small gasoline engines do not need a battery. Instead, they actually generate the power for the spark plug using a magneto. … The voltage causes a spark to jump across the spark plug’s gap, and the spark ignites the fuel in the engine.

What is the difference between a magneto and a coil?

A magneto is an engine driven device consisting of a rotating magnet and field poles. It needs no battery, and generates current to spark a spark plug. A coil is a device used in an ignition system that is actually a trsnsformer that steps battery voltage up to approx. 30,000 volts.

How do you troubleshoot an ignition coil?

Here’s How To Diagnose and Test An Ignition Coil

  1. Plug the tester into the coil.
  2. Attach the ground wire.
  3. Plug in the coil connector.
  4. Adjust the spark gap to the correct measurement.
  5. Start the engine.
  6. If there’s spark, great, it works! If there’s no spark, it’s a bad coil.

What should the Ohms be on a coil?

The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5. This standard level tends to offer the most consistent level for your vape.